KRS-6 Axial expansion joints are used to absorb the thermal expansion parallel to the axis of the straight pipelines. Long piping systems are divided into shorter expanding sections, and isolated by main anchors. Thus the movements in the individual expanding sections are absorbed by the KRS-6 axial expansion joints in this section..
Standard Production : AISI 316TI (DIN 1.4571)
Special Production : AISI 304 (DIN 1.4301), AISI 316 (DIN 1.4401)
Design Information :
Design Pressure : 16 BAR
Design Temperature : 250 C
Outer Pipe Features :
Standard Pipe : Rst 37-2 (DIN 1.0038) PN 16
Special Pipe : Stainless Steel
Liner Features :
Standard Liner : Rst 37-2 (DIN 1.0038)
Special Liner : AISI 304 (DIN 1.4541), AISI 309 (DIN 1.4828), AISI 316 (DIN 1.4401), AISI 316 ti (DIN 1.4571) etc
For absorbing axial movement, For reducing tension and noise, water pipe lines, In large buildings and similar constructions, Energy save, Simple Installation, Decorative Structure etc.
The weldends & pipe parts of between DN 25 – DN 50 are with special paint ( for corrossion protection).
Products are under our 2 years quarantee for factory faults. For special requirements please consult us. Please see Useful technical tables pages for thermal expansion tables. For corrosive media please consult us.
Installation In Large Buildings & Similar Constructions
Important Points Before Installation
Important Points Before Installation of KRS-6 heat compensators are similiar with metal expansion joints.
Please see Installation Instructions For Expansion Joints